Pins

Dean Plumbing and Gas Piping in Huntsville, AL, replaced and anchored a house hose bib to brick using a concrete anchor. They sealed the hole with hydraulic cement and repaired a yard service tee. They tested the system with no leaks and recommend a foundation inspection. Work is guaranteed for 90 days.

Dean Plumbing and Gas Piping in Madison, AL repaired a seized garbage disposal by restoring its gears and replaced a leaking disposal gasket. They corrected waste outlet installation and tested plumbing for leaks. They advised dishwasher repair and sink support inspection, providing a 90-day work guarantee.

DEAN PLUMBING and GAS PIPING in New Hope, AL cleared a main line blockage using drain machine cable and water flushing. They replaced a toilet’s wax ring, supply lines, and closet bolts, testing all fixtures to ensure proper function without leaks or clogs.

Dean Plumbing and Gas Piping repaired a broken hose bib on a Huntsville, AL home. They secured it to a brick wall, replaced two broken CPVC tees in the crawl space with PEX adapters, and restored water pressure. The system passed leak tests, and work is guaranteed for 90 days.

Dean Plumbing and Gas Piping replaced the fill valve, seal, and supply line on an upstairs bathroom toilet in Huntsville, AL. They also installed a new Venetian bronze kitchen faucet and replaced leaking shark bite fittings with PEX shutoffs. All work was tested and guaranteed for 90 days.

Dean Plumbing and Gas Piping in Huntsville, AL repaired cast iron drains by installing clean outs and replacing pipes with PVC. They tested the system for leaks and extended water lines for future cabinet plumbing. The service included drain inspection with a camera and recommendations for pressure jetting.

Dean Plumbing and Gas Piping traced a water overage to a hall bathroom toilet fill valve in Huntsville, AL. They rebuilt the toilet by replacing the fill valve, round seal, and supply line. They tested the system and confirmed no leaks. The work includes a 90-day guarantee.

Dean Plumbing and Gas Piping in Owens Cross Roads, AL, exposed plumbing behind the tub spout and shower valve by cutting drywall. They installed new CPVC and copper piping with Toledo adapters and a new shower head. The system was tested with no leaks. Work includes a one-year guarantee.

Dean Plumbing and Gas Piping in Huntsville, AL, removed rubber debris from a supply line to restore hot water flow to a kitchen faucet. They ensure clear water pipes and proper faucet function for residential plumbing needs.

Dean Plumbing and Gas Piping in Madison, AL replaced a seized garbage disposal with the same model. They connected it to the existing power and drain lines, tested seals with water, and ensured proper operation. Installation materials and a 90-day warranty were included.

Dean Plumbing and Gas Piping in Madison, AL replaced an 80-gallon electric water heater in a garage. They removed the old unit, installed an A.O. Smith Lite commercial heater, rewired it for residential use, connected piping per code, tested for leaks, and handled disposal. The work includes a one-year guarantee.

Dean Plumbing and Gas Piping installed a Delta kitchen faucet in Harvest, AL, replacing an old clogged faucet with off-brand cartridges. They supplied all materials, tested for leaks, and ensured proper function. The work includes a 90-day guarantee.

Dean Plumbing and Gas Piping installed a customer-supplied disposal in Huntsville, AL. The team connected it to the existing drain and electrical system, tested for leaks, and found no active issues. They noted slight backup in another sink and recommended considering drain replacement if problems continue.

Dean Plumbing and Gas Piping in Huntsville, AL, replaced cartridges, seats, and springs in a two-handle Delta vanity faucet. They removed a broken kitchen disposal and installed two basket strainers. They adjusted vent piping to meet manufacturer specifications. All work was tested and confirmed leak-free.

Dean Plumbing and Gas Piping in Huntsville, AL replaced a 50-gallon electric water heater in a garage. They connected new copper fittings and piping, installed a pan and expansion tank, insulated lines, and tested the system. They guarantee their work for one year and provide a six-year factory warranty through Rheem.

Dean Plumbing and Gas Piping in Huntsville, AL removed and replaced a customer-supplied single-handle Delta shower valve tub spout trim kit and shower arm. They cut drywall to access plumbing, installed press-fit PEX adapters on copper pipes, built a new tub spout assembly, and tested for leaks. The work is guaranteed for 90 days.

Dean Plumbing and Gas Piping repaired and replaced damaged cast iron clean out adapters in Huntsville, Alabama. They removed lava rock debris and buildup using gloves, vacuum, and cameras. They coordinated pump truck jetting to clear pipes fully, restoring proper drainage. Dean Plumbing supplied all materials for the project.

Dean Plumbing and Gas Piping cleared a main sewer line clog behind a house in Huntsville, Alabama. They used 50 feet of cable and installed a boot over the pipe. They recommend adding clean outs for drain access and running a camera to inspect the cast iron drain for further issues.

Dean Plumbing and Gas Piping in Huntsville, AL replaced a vanity faucet, pop-up drain, shower head, and shower faucet components in a master bedroom bathroom. They cleared hair from the shower drain and tested for leaks. The company recommends replacing the copper P-trap for improved drainage.

Dean Plumbing and Gas Piping replaced a leaking 16-year-old gas water heater in Huntsville, AL. They installed a tall natural gas water heater with copper piping, a new gas line, an expansion tank, and a pan drain system to direct water safely outside. The installation included warranty support and leak testing.

Dean Plumbing and Gas Piping replaced the flapper, fill valve, and supply line in an upstairs toilet in Huntsville, AL. They supplied all materials, completed the rebuild, and tested for leaks. The work comes with a 90-day guarantee. Existing fixtures are not covered by warranty.

Dean Plumbing and Gas Piping in Huntsville, AL replaced a warped toilet flange and installed a new toilet with a rubber gasket sealed by silicone. They also replaced compression angle stops, supply lines, and installed a slow-close wood toilet lid. All work passed leak tests and includes a 90-day guarantee.

Dean Plumbing and Gas Piping replaced cast iron drains with PVC and updated galvanized water lines to PEX in a home in Huntsville, Alabama. They secured pipes, connected to the main line, and installed new supply lines for the vanity faucet. The system was tested with no leaks and materials were provided by the contractor.

Dean Plumbing and Gas Piping in Huntsville, AL, fixed water backup in a laundry room and kitchen sink by clearing drains and replacing old piping. They tested the system with running water, ensuring no leaks. The work includes a 90-day warranty on repairs performed.

Dean Plumbing and Gas Piping installed insulated hose bib lines with new shutoff valves in Huntsville, AL. They secured pipes inside and through ceilings and walls, applied hydraulic cement for protection, and tested for leaks. The work comes with a 90-day guarantee.

Dean Plumbing and Gas Piping replaced a leaking 10-year-old electric water heater in a utility room in Huntsville, AL. They installed a 50-gallon Rheem electric water heater, connected it to existing copper pipes and electrical lines, and ensured no leaks after testing. The work includes a one-year guarantee.

Dean Plumbing and Gas Piping installed a customer-supplied sink, faucet, and basket strainers in Madison, Alabama. They reused existing plumbing, applied caulk and silicone for sealing, and tested for leaks with water tubs. The work is guaranteed for 90 days, excluding customer-supplied fixtures.

Dean Plumbing and Gas Piping in Huntsville, AL replaced cast iron pipes with PEX lines, installed new water and drain lines, added shutoffs, and secured plumbing systems throughout the house. They connected new washer and hose bibs plumbing, ensuring all work passed leak tests with a 90-day guarantee.

Dean Plumbing and Gas Piping in Huntsville, Alabama, installed a new sewer service by excavating from the AC unit to the manhole. They replaced old drains, ran new PVC piping, secured connections with hydraulic cement, backfilled trenches with gravel, and tested the system to ensure no leaks.

Dean Plumbing and Gas Piping repaired a separated 3/4-inch PVC water service line in Huntsville, Alabama. They removed damaged pipe and roots, replaced the section with 3/4-inch PEX adapters and pipe, and tested the repair with no leaks. They provided materials and offer a 90-day work guarantee.

Dean Plumbing and Gas Piping in Madison, Alabama replaced the fill valve and supply line on a master bathroom toilet. They tested the toilet multiple times, confirming proper function with no leaks. The company supplied all materials and offers a 90-day guarantee on their work.

Dean Plumbing and Gas Piping installed a spacer flange and a new 10-inch rough-in toilet with a bidet seat in an upstairs master bathroom in Huntsville, Alabama. The team connected a new stop valve, capped an unused PEX line, and confirmed all components were leak-free and functioning properly at completion.

A plumbing technician in Huntsville, Alabama cleared a blocked student kitchen drain. They used a drain machine and water flow to push the cable until it reached an obstacle under the house. After retrieving the cable, they tested the washing machine. All drains worked correctly after service verification.

A plumber in Huntsville, Alabama replaced a leaking kitchen sink basket strainer and flanged tailpiece. The plumber also installed new tubular piping and tested the system with several tubs of water. All materials were supplied, and no leaks were found after testing. The work includes a 90-day guarantee.

Dean Plumbing and Gas Piping replaced a toilet seat in the hall bathroom and installed a soft-close elongated seat. In the master bathroom, the team replaced a broken flush lever to stop constant running. All materials were provided. The plumbing work was tested and confirmed leak-free in Madison, Alabama.

A plumber in Madison, Alabama replaced a customer-supplied bidet tee and installed a new toilet supply line. The existing bidet supply line was reused after inspection. Final testing showed no leaks, and all components functioned correctly. Customer-provided materials were used without warranty from the contractor.

A plumber in Huntsville, Alabama replaced a leaking Delta shower valve cartridge. The technician disassembled the valve, cleaned the interior, installed a new long shank cartridge, and restored water pressure. All materials were supplied, and the system was tested with no leaks after service completion.

Dean Plumbing and Gas Piping completed a plumbing installation in Huntsville, Alabama. Work included installing an ice maker box, replacing galvanized water lines, adapting drains to cast iron with PVC and mission bands, running new water service for a utility sink and hose bib, and insulating bathroom pipes. All systems were tested and showed no leaks.

A plumber in Huntsville, Alabama cleared a clogged vanity drain using a 25-foot auger cable. The blockage was located in cast iron piping beneath the sink. After removing the obstruction, the system drained properly and showed no leaks during testing.

A plumber cleared a clogged toilet in the second bathroom of a break room in Huntsville, Alabama. The blockage was removed using a toilet auger, and flushing was tested successfully. The plumber also informed the customer that paper towels were likely to cause future clogs.

A plumber in Huntsville, Alabama replaced a customer-supplied Delta shower cartridge. After restoring water pressure, they confirmed a minor drip stopped and tested water pressure at 60 psi. Final inspection showed the shower arm required extended time to equalize pressure but no leakage remained. The plumber did not warranty customer-provided parts.

A plumber in Huntsville, Alabama cleared a main sewer line blockage that caused toilet bubbling and sewer odors. The technician removed the toilet and used a cable to remove debris. Drains were tested and functioned properly after service. Further inspection with a camera may be needed if issues return.

Dean Plumbing and Gas Piping replaced a 1/2 HP InSinkErator garbage disposal in a kitchen in Huntsville, Alabama. The old unit had a loose gear and made grinding noises. The new disposal connected to existing drain lines. All materials were provided, and the unit tested with no leaks. Work includes a 90-day guarantee.

Dean Plumbing and Gas Piping replaced leaking angle stops on a bathroom vanity in Huntsville, Alabama. Technicians removed old shut-offs, installed new 12 x 3/8 hot and cold angle stops, and capped additional shut-offs as a safety measure. All materials were provided, and testing confirmed there were no active leaks after completion.

Dean Plumbing and Gas Piping repaired a leaking T-joint in an attic in Huntsville, Alabama. The technician removed the damaged section of piping and installed new PVC fittings and mission bands. After installation, the system showed no signs of active leakage during testing. All materials were supplied by Dean Plumbing and carry a 90-day guarantee.

Dean Plumbing and Gas Piping replaced deteriorated copper drain lines in a ceiling in Huntsville, Alabama. The team removed drywall to access the plumbing, installed new fittings and a metal cleanout cap, and tested all seals using water from an upstairs bathroom. All materials were provided, and the final system showed no active leaks.

Dean Plumbing and Gas Piping replaced a leaking cast iron toilet flange on a second-floor bathroom in Huntsville, Alabama. The team removed the toilet, cut out damaged sections of pipe, and installed a new PVC flange using mission bands. They reset the toilet with a new wax seal and tested to confirm there were no active leaks.

A plumber in Huntsville, Alabama cleared a basement tub backup by using a drain machine at the clean-out access. They flushed the system with water to remove debris. After testing drainage, they found a crack in the clean-out cap, sealed it with silicone, and confirmed the system was working properly.

Dean Plumbing and Gas Piping replaced a leaking 50-gallon electric water heater in a garage in Huntsville, Alabama. The new unit was installed with CPVC adapters, a stainless steel tee, an expansion tank, and a shutoff valve. They ran proper drainage, insulated piping, and verified leak-free operation. All materials were provided and installation is guaranteed for one year.

Dean Plumbing and Gas Piping completed a yearly descale on an exterior tankless water heater in Huntsville, Alabama. The unit passed leak tests with no issues found. Service includes a 90-day workmanship guarantee.

A plumber in Huntsville, Alabama cleared a clogged kitchen sink drain using a 50-foot cable through the roof vent. They also cleared a clogged vanity drain from under the cabinet using a drain machine. All drains were tested with water and confirmed to flow properly without leaks.

Dean Plumbing and Gas Piping completed annual maintenance on an exterior tankless water heater in Huntsville, Alabama. The team flushed the unit, resolved an electrical issue caused by a tripped GFCI outlet, and repaired a Delta faucet by replacing cartridges, seats, and springs. All components were tested and confirmed leak-free.

A plumber in Huntsville, Alabama cleared a main line clog from a cleanout located in a flower bed. They used nine sections of cable with a cutter head to remove the blockage. The team retrieved the cable with cloth debris attached and confirmed proper drainage after testing the line.

Dean Plumbing and Gas Piping replaced a leaking pop-up drain and a rubber washer on a slip extension in a sales room in Huntsville, Alabama. They tested the installation with multiple sink fills. All materials were provided, and the system showed no leaks after testing. The work includes a 90-day guarantee.

A technician in Huntsville, Alabama installed a customer-supplied toilet in a hall bathroom. The service included fitting a new supply line, wax seal, and closet bolts. The toilet was tested with multiple flushes and showed no active leaks. The installation is covered by a 90-day workmanship guarantee.

Dean Plumbing and Gas Piping replaced a leaking Rheem 50-gallon electric water heater under warranty in Huntsville, Alabama. The team installed a new unit using existing copper pipe, electrical, and drainage. They added a new expansion tank, drain pan, and pipe insulation. All components were tested and showed no leaks upon completion.

Dean Plumbing and Gas Piping completed a faucet and toilet repair in Huntsville, Alabama. The work included replacing cartridges, seats, and springs in a garden tub faucet, fixing a leaking toilet by resetting it with a new wax ring and supply line, and installing a new cartridge in a kitchen faucet. All systems tested leak-free.

Dean Plumbing and Gas Piping repaired a broken CPVC elbow joint leading from a hose bib in Hazel Green, Alabama. The technician replaced the damaged section, added PEX adapters, secured the hose bib to the wall, sealed the hole with silicone, and confirmed there were no leaks during testing. All materials were provided by the contractor.

Dean Plumbing and Gas Piping replaced a 50-gallon electric water heater in a garage in Madison, Alabama. The team installed a new unit with an expansion tank, shutoff valve, insulated water lines, and drainage lines to prevent leaks. All materials were supplied and tested to ensure proper function with no active leaks.

Dean Plumbing and Gas Piping repaired separated pipe fittings and replaced plastic-threaded connections near a check valve in Hazel Green, Alabama. The team installed new lead adapters and piping, tested the system for leaks, and completed a soft soil refill. All materials were provided, and the work is guaranteed for 90 days.

DEAN Plumbing and Gas Piping performed a comprehensive yearly descale on an exterior Navien tankless water heater in Huntsville, Alabama, flushing and clearing lines, restoring optimal pressure, and confirming leak-free operation to ensure efficient winter performance and extend unit lifespan.

Dean Plumbing and Gas Piping replaced a leaking copper kitchen drain line in Huntsville, Alabama. The work included cutting damaged pipe, transitioning to PVC, installing a new trap adapter, and replacing a leaking basket strainer. All materials were provided, and the new system was tested for leaks before completion.

Dean Plumbing and Gas Piping replaced a leaking 50-gallon electric water heater in a bedroom closet in Huntsville, Alabama. They installed the new unit in a drain pan, connected existing copper and CPVC lines, adjusted heater placement to meet code, and confirmed proper function with no leaks. Work included materials and carries a one-year guarantee.

Dean Plumbing and Gas Piping replaced old water lines in Huntsville, Alabama. They connected existing 12-gauge galvanized lines using MegaPress adapters and PEX pipe. They also modified a drain to allow for future cabinet installation and sealed it with a Fernco cap. The system was tested with no leaks detected. All materials were provided by the contractor.

Dean Plumbing and Gas Piping completed plumbing fixture replacements in Huntsville, Alabama. The work included replacing a washing machine supply box, trap, water supply connections, and drywall access. Technicians also installed two toilets, two lavatory faucets, new water shutoff valves, and P-traps. All components were tested for proper function after installation.

Dean Plumbing and Gas Piping repaired a leak behind a break room sink wall in Huntsville, Alabama. The team located a damaged galvanized pipe joint and replaced it with new PVC fittings. They removed wet insulation and drywall to access the source. The repair was completed and tested with no active leaks.

Dean Plumbing and Gas Piping repaired a leaking galvanized pipe behind a wall in Huntsville, Alabama. The team located the leak above a downstairs light fixture, removed wet insulation and drywall, and replaced the damaged pipe using PVC fittings and a shielded mission band. The system was tested with no active leaks after repair.

Dean Plumbing and Gas Piping replaced a damaged toilet in Huntsville, Alabama. The team installed a 10-inch rough-in toilet due to space limitations and connected a new supply line. All materials were provided, and the system was tested with no leaks present at completion. The work is covered by a 90-day guarantee.

Dean Plumbing and Gas Piping replaced a Delta single-handle valve trim kit with a new Delta trim kit, tub spout, and valve kit in Huntsville, Alabama. They connected the setup to existing PEX piping using Lex adapters. The system was tested with running water and showed no leaks. All materials were provided by the contractor.

Dean Plumbing and Gas Piping replaced a single-handle Delta shower valve trim kit in Huntsville, Alabama. The technician removed old plumbing, installed new copper piping with PEX and ProPress fittings, and sealed gaps with silicone. Work included cutting drywall to access plumbing. All materials were provided, and the system was tested with no leaks.

A plumber in Huntsville, Alabama repaired a leaking 34x12 copper water line in a utility closet using PEX adapters and fittings. The technician also rebuilt a frost-free hose bib and purged air from the system after restoring the water supply. All completed repairs include a 90-day warranty.

A plumber in Huntsville, Alabama cleared a main sewer line using an electric drain machine and outdoor cleanout. A camera inspection revealed a two-inch repaired section with rubber couplings catching solid waste. The rest of the line to the city lateral was inspected and showed no further issues.

Dean Plumbing and Gas Piping replaced damaged exterior gas lines between the meter and HVAC unit in Huntsville, Alabama. The crew capped and removed old piping, installed new lines with a sediment trap, and secured all parts to the foundation. They pressure tested the system and coordinated with the city inspector for service restoration.

Dean Plumbing and Gas Piping replaced a single-handle Delta tub and shower valve trim kit in Huntsville, Alabama. The installation connected existing CPVC and copper lines using PEX adapters. Technicians sourced missing parts across two trips and completed testing with no active leaks. All materials were provided by Dean Plumbing, and the work is covered for 90 days.

Plumbers in Huntsville, Alabama inspected a clogged drain line using a camera and found root intrusion and a partial collapse. These problems caused backups during heavy use. The team will provide a quote for replacing the main drain line from the house to the city connection.

A kitchen sink drain was cleared and reworked in Huntsville, Alabama. The plumber removed a grease blockage using an electric drain machine, adjusted a drain slope, rerouted a water line to the rear hose bib, and repaired a leaking PEX pipe in the crawlspace. All systems were tested and returned to service.

A plumber in Huntsville, Alabama replaced a round chair-height toilet in a hallway bathroom and installed a new unit using the existing handicap seat. In the master bathroom, they replaced a Delta tub and shower valve trim kit, connecting it to existing copper lines using PEX adapters. All materials were provided, and testing showed no leaks.

Dean Plumbing and Gas Piping replaced and repositioned a 7-year-old water heater in Huntsville, Alabama. The team reworked PEX lines, added 18 inches of hard pipe, installed a new expansion tank, and connected a booster heater for increased hot water. All materials were provided, and the system was tested with no leaks.

A plumber in Huntsville, Alabama replaced a leaking pressure reducing valve in a crawlspace. The new valve was installed on a copper water line and set to 65 psi. The plumber purged air from the plumbing system and noted a leaking hose bib that may need replacement soon. Installation includes a 90-day warranty.

Dean Plumbing and Gas Piping replaced a washer drain box in the utility room and an ice maker box in the kitchen in Madison, Alabama. Technicians secured new boxes to studs for stability and used fittings to reduce pipe stress. All materials were supplied by Dean Plumbing. The system was tested with no active leaks.

A licensed contractor in New Hope, Alabama installed a new gas system for an LP cooktop. The service included drilling through brick and cabinetry, running over 20 feet of black iron pipe, securing lines to floor joists, adding a shut-off valve and regulator, and pressure testing the system to confirm leak-free operation.

Dean Plumbing and Gas Piping repaired a broken toilet flange in a home in Madison, Alabama. Technicians ran a camera inspection, identified the cracked flange, and replaced it with a new one secured by concrete anchors. They reinstalled the toilet with a new wax seal and tested for leaks, confirming proper function.

Dean Plumbing and Gas Piping rebuilt a hall bathroom toilet in Huntsville, Alabama, replacing the fill valve, flapper, and supply line. They also cleared a clogged vanity drain by disassembling the P-trap and running 30 feet of cable to remove blockages. All materials were supplied, and systems tested leak-free.

A plumber in Huntsville, Alabama cleared a clogged washing machine drain by removing the blockage from the studor vent and running a Gorlitz cable to remove remaining debris. The system was flushed with water and tested successfully. The technician also removed the vent for customer replacement. Draining functioned properly after service.

Dean Plumbing and Gas Piping repaired a damaged washing machine water line in Huntsville, Alabama. The technician replaced a rusted cold water hose, installed a new shutoff valve, and replaced both hot and cold supply lines. Testing confirmed no leaks. The company provided materials and guarantees the work for 90 days.

Dean Plumbing and Gas Piping installed a pressure-reducing valve (PRV) in a residential garage in Huntsville, Alabama. The technician connected the PRV to existing copper lines using lead adapters and secured the unit to wood strapping. The system passed testing with no leaks and includes a 90-day workmanship guarantee.

A plumber in Huntsville, Alabama cleared a blockage from a branch line connecting a washing machine and kitchen sink. They used a large electric drain machine and rooftop vent access to remove a soft clog of hair and grease. The plumber ran 35 feet of sewer cable and tested drainage successfully after clearing.

Dean Plumbing and Gas Piping completed a yearly descale on a tankless water heater and rebuilt a toilet by replacing the fill valve, supply line, and flapper in Huntsville, Alabama. All materials were provided, and no leaks were found after testing. The work is guaranteed for 90 days.

Dean Plumbing and Gas Piping replaced a non-working dual flush toilet in the right-hand hall bathroom in Huntsville, Alabama. The team installed a new toilet with a wax seal, supply line, and closet bolts, then sealed it with white caulk. They tested the system and confirmed no leaks after installation.

A plumber in Huntsville, Alabama removed a leaking toilet and identified cracked rubber washers on the tank-to-bowl bolts as the cause. The technician replaced the damaged parts, dried the surrounding area, and confirmed the leak had stopped.

A plumber in Huntsville, Alabama replaced a faulty toilet flange that was set below floor level and leaking. The technician installed a new flange with a rubber coupling in the crawlspace, reinforced it with wooden supports, and sealed the base with silicone. The toilet was reset with a wax ring and tested successfully.

Dean Plumbing and Gas Piping replaced a defective ice maker box in Huntsville, Alabama. The technician removed drywall between studs to install the new box, connected it to existing copper lines using PEX adapters, and added insulation. A new supply line was installed, tested for leaks, and left with the valve in the off position.

A plumber in Huntsville, Alabama rebuilt a 50-gallon electric water heater in a garage. The technician replaced both heating elements and thermostats after diagnosing a dry-fired failure. After draining, refilling, and purging the tank, the water heater resumed normal operation. A 90-day warranty was issued for the repair.

Dean Plumbing and Gas Piping replaced a vanity and lavatory faucet in an upstairs hallway bathroom in Huntsville, Alabama. The team removed the old unit, trimmed a backing board for a proper fit, installed the new components, tested for leaks, and added a customer-provided shower head. All old materials were removed after service.

A plumber in Huntsville, Alabama cleared a clog causing backups in a laundry room from the washing machine and kitchen sink. They used a drain machine through the kitchen drain, flushed debris with hot water from the laundry vanity, and tested all drains to ensure proper flow was restored.

A technician in Athens, Alabama, diagnosed and repaired a Rinnai tankless water heater that failed to produce hot water due to Error Code 11. The service included cleaning corroded ignitor rods, resetting the unit, and verifying proper function with a high fire start-up test. The system produced sufficient hot water following the repair.

A technician in Huntsville, Alabama cleared a clogged drain caused by a backup from a washing machine to the kitchen sink. The technician accessed the vent from the roof and used a drain cable to clear the blockage. Final tests with hot water and washing machine discharge showed proper drainage.

A plumber in Huntsville, Alabama replaced a gas control valve and thermocouple on a 50-gallon natural gas water heater. The technician drained the tank, removed the faulty components, reconnected the gas line, refilled the tank, and tested the system. The water heater restored normal operation with a 90-day warranty on the installed repair parts.

Dean Plumbing and Gas Piping replaced a Delta shower valve and trim kit in Huntsville, Alabama. The team accessed plumbing by cutting through the wall behind the shower and connected new parts using PEX adapters and pipe. All materials were supplied, and leak testing confirmed proper function at project completion.

Dean Plumbing and Gas Piping replaced a leaking pressure-reducing valve in Huntsville, Alabama. They connected new piping with PEX adapters, set the pressure to 70 psi, and ensured there were no active leaks. All materials were provided, and the area was reburied with existing soil. Work is covered by a 90-day guarantee.

Dean Plumbing and Gas Piping replaced a 50-gallon electric water heater in a crawl space in Huntsville, Alabama. The team leveled the ground, repositioned cinder blocks, reused mounting straps, installed a new expansion tank and shutoff, and connected copper and CPVC piping. All materials were provided, and the system tested without leaks.

Dean Plumbing and Gas Piping replaced a leaking, cracked toilet in a master bathroom in Huntsville, Alabama. The team installed a new chair-height toilet, replaced the supply line, wax seal, and closet bolts, and sealed the base with white caulk. All materials were provided, and final testing confirmed no leaks.

Dean Plumbing and Gas Piping completed multiple plumbing repairs in Huntsville, Alabama. Services included fixing a leaking Delta kitchen faucet, resetting and sealing a loose toilet, replacing bathroom faucet components, updating water supply lines, installing a customer-provided showerhead, and performing standard toilet rebuilds. All repairs passed post-service leak testing.

A plumber in Huntsville, Alabama cleared a sink clog using an auger on a cast iron drain. After fixing a leaking pop-up drain, the plumber also resolved a toilet clog with a toilet auger. Final testing showed proper drainage and no active leaks after the repairs.

DEAN PLUMBING and GAS PIPING repaired a leaking pop-up drain and replaced a broken toilet flush handle in a master bathroom in Madison, Alabama. The team installed a new flush handle with a brass arm and resealed the drain assembly using putty and thread sealant. All repairs were tested and confirmed leak-free.

A technician in Huntsville, Alabama, completed a descale procedure on a Rinnai tankless water heater mounted on the exterior wall of a home. The service involved running a cleaning solution through the heat exchanger, flushing the unit, and ensuring proper performance through testing after removal of the descaling equipment.

A plumber in Huntsville, Alabama replaced a tubular tee with an extended slip extension to improve support and stability. They also relocated the dishwasher outlet connection to reduce strain on the drain system.

Dean Plumbing and Gas Piping replaced a leaking 80-gallon water heater with a new 50-gallon electric Rheem unit in Huntsville, Alabama. The team installed a new shut-off valve, expansion tank, and copper connections. They tested the system for leaks and confirmed proper operation. All materials were provided, and the installation includes a one-year guarantee.

Dean Plumbing and Gas Piping repaired a leaking exposed sewer main in the backyard near the pool area in Huntsville, Alabama. The team replaced damaged rubber couplings with reinforced mission bands and installed new sewer piping. They also reinstalled a wooden support structure. All repairs passed testing and include a 30-day warranty.

A plumber in Huntsville, Alabama replaced a leaking tub shoe and overflow kit. The technician adapted the new components to existing cast iron drains using a shielded Fernco fitting and PVC parts. After testing, leaks appeared on the cast iron drain, and a repair quote will be provided. All materials were supplied by the plumber.

Dean Plumbing and Gas Piping installed a new water heater in a renovated closet in Huntsville, Alabama. The job included moving the unit from the garage, installing it on a stand with a pan, connecting copper and PEX lines, adding an expansion tank, and ensuring full compliance with plumbing codes. No leaks were found during testing.

Dean Plumbing and Gas Piping replaced a faulty pressure reducing valve and leaking kitchen faucet in Huntsville, Alabama. They installed a new valve set to 70 psi and a Delta kitchen faucet with sprayer. All materials were provided, and tests confirmed proper function with no leaks. Work includes a 90-day guarantee.

A plumber in Huntsville, Alabama cleared a clogged drain in a double vanity. The left side was blocked while the right side drained normally. The plumber used a cable to remove debris and flushed the system with water. After testing, both drains worked properly without leaks. A bio-clean treatment was recommended for further maintenance.

Dean Plumbing and Gas Piping installed a customer-supplied vanity and faucet in Huntsville, Alabama. The project included modifying drainage, replacing a leaking shower valve, reworking water lines, and installing a 38-gallon low-boy water heater under countertops. All plumbing connections were tested and confirmed leak-free. Dean Plumbing provided all materials except the vanity and faucet.

Dean Plumbing and Gas Piping converted a residential HVAC system from propane to natural gas in Madison, Alabama. The team connected the new gas meter, installed an orifice kit, and tested the gas piping for leaks. After inspection, they activated the furnace, ensured proper operation, and confirmed system safety with additional leak testing.

Dean Plumbing and Gas Piping converted a home's heating system from propane to natural gas in Huntsville, Alabama. The team connected a new gas meter, modified gas piping, adjusted the HVAC system, and performed full leak testing. After inspection, they activated the furnace and verified safe operation of all gas lines.

Dean Plumbing and Gas Piping rebuilt a toilet in the upstairs bathroom by replacing the flapper, fill valve, and supply line. In the downstairs master bathroom, they repaired a leaking Delta shower valve and adjusted the temperature control. They also diagnosed a faucet drain leak. This work took place in Madison, Alabama.

Dean Plumbing and Gas Piping replaced a leaking expansion tank on an electric water heater in a garage in Huntsville, Alabama. The technician removed excess water, tested the unit, and confirmed no leaks after installation. The expansion tank had reached its expected lifespan after five years. All materials were provided, and the work is guaranteed for 90 days.

Dean Plumbing and Gas Piping replaced a leaking tub shoe and overflow kit in a master bathroom in Huntsville, Alabama. They tested the new installation with multiple full tubs to confirm there were no leaks. The overflow functioned correctly, and no water reached the ceiling during testing. All materials were provided by the contractor.

A plumber in Huntsville, Alabama replaced a broken Pressure Reducing Valve after a water service line separated at the meter. The repair included installing a reinforced PEX adapter to connect to existing PVC and purging air from the system. All work was tested and completed with a 90-day warranty.

Dean Plumbing and Gas Piping replaced a toilet in a hall bathroom in Huntsville, Alabama. The team installed a new American Standard elongated toilet and shutoff valve. They secured the flange with additional screws due to water-damaged flooring. All materials were provided, and the system showed no leaks after testing.

Dean Plumbing and Gas Piping replaced a customer-supplied kitchen faucet and rerouted bathroom hot and cold water lines through the wall in Huntsville, Alabama. Technicians installed a new toilet shutoff, capped vanity lines, and supplied all materials except the faucet. All systems tested without leaks, and work is covered by a 90-day guarantee.

Dean Plumbing and Gas Piping replaced a leaking toilet shutoff valve after hours in Huntsville, Alabama. The plumber removed a compression valve from a ½-inch CPVC line and installed a glue-style shutoff with a new toilet supply line. All components were reconnected and tested with no leaks at job completion.

Dean Plumbing and Gas Piping replaced a customer-supplied vanity faucet in a downstairs bathroom in Huntsville, Alabama. They installed new supply lines and tested the faucet for leaks using multiple sink fills. The installation showed no active leaks, and the system worked as expected after testing. The workmanship includes a 90-day guarantee.

Dean Plumbing and Gas Piping replaced a leaking 50-gallon electric Rheem water heater in a garage in Madison, Alabama. The team installed a new unit with an expansion tank, shutoff valve, copper pipe connections, and electrical hookup. They also replaced a pressure regulator in a flower bed and reburied it with a new access box.

A plumber in Arab, Alabama repaired a leaking CPVC water line in the crawl space that supplied the washing machine. The contractor used PEX adapters for the fix and reconnected a separated PVC drain for the master shower. Air was purged, all systems were tested, and minor sink drain issues were also resolved.

A plumber in Huntsville, Alabama cleared a clogged main sewer line that was backing up two bathrooms. The technician used four cable sections through the cleanout to break and flush the blockage. They ran water through all three bathrooms to confirm proper drainage before completing the job.

Dean Plumbing and Gas Piping replaced a damaged hose bib at the front of a home in Huntsville, Alabama. Technicians removed the faulty part, connected a new hose bib to existing copper piping, anchored it to the wall, sealed the entry point, and confirmed proper function with no leaks. All materials were provided by the contractor.

A plumber in Huntsville, Alabama removed a faulty Studor vent beneath a kitchen sink and cleared a blocked drain using a cable auger. Fiber debris from a bath mat was extracted. The plumber tested the line by emptying full washing machine tubs to confirm proper drainage throughout the system.

Dean Plumbing and Gas Piping installed a new garbage disposal in a single-compartment sink in Huntsville, Alabama. The technician replaced a leaking P-trap, adjusted the drain height, and reworked the wiring using a junction box. The system was fully tested with no leaks found. All materials were provided, and service is guaranteed for 90 days.

Dean Plumbing and Gas Piping reset an existing toilet and installed a customer-supplied shower valve trim kit in Huntsville, Alabama. The work included a new wax ring, supply line, closet bolts, fill valve, and adapters connecting to copper lines. All components were tested with no leaks and a 90-day labor guarantee was provided.

Dean Plumbing and Gas Piping replaced a 50-gallon gas water heater in the basement of a home in Huntsville, Alabama. The team connected the unit to existing gas lines, venting, and copper piping, installed a new expansion tank, and tested for leaks. The heater was installed using warranty approval and passed all checks.

Dean Plumbing and Gas Piping cleared a clogged toilet in the front bathroom and replaced the Delta 1700 series cartridge, seats, washers, and springs in the master bathroom in Huntsville, Alabama. They tested all fixtures for proper function and confirmed there were no active leaks after repairs. The customer was advised to contact the manufacturer for sprayer parts.

Dean Plumbing and Gas Piping replaced gas lines for an HVAC system using megapress fittings and new black iron piping in Madison, Alabama. They installed gas regulators and routed piping to a Hayward pool heater. All work passed inspection and includes a one-year warranty on installation craftsmanship.

Dean Plumbing and Gas Piping repaired a broken toilet flange in an employee bathroom in Huntsville, Alabama. The team installed a stainless steel repair flange with concrete anchors, reset the toilet using a reinforced wax ring and new closet bolts, and sealed it with caulk. All work was tested for drainage and function.

Dean Plumbing and Gas Piping completed descaling on two attic-mounted tankless water heaters in Huntsville, Alabama. Technicians flushed the heat exchangers in both a Bosch and a Rheem unit. They confirmed normal operation after removing all descale solution. System testing showed both units functioned properly.

Dean Plumbing and Gas Piping cleared a clog in a washing machine drain in Huntsville, Alabama. They used an electric drain machine with 30 feet of sewer cable through a rooftop vent to remove hair and cast iron debris. They flushed the line with water to clear remaining buildup and checked for proper drainage.

Dean Plumbing and Gas Piping cleared a washing machine drain obstruction in Huntsville, Alabama. Technicians used an electric drain machine and fed 30 feet of sewer cable through a rooftop vent to remove debris, including hair and buildup. They flushed the line with water to confirm flow and advised follow-up if blockages return.

Dean Plumbing and Gas Piping repaired a leaking polyethylene water service line in Huntsville, Alabama. The team excavated the damaged section and installed a 1x6 compression repair clamp over a pinhole caused by surface traffic. Water supply was restored and tested. A 30-day warranty covers the repair due to the pipe’s age and material.

A technician in Huntsville, Alabama descaled a Rinnai tankless water heater in the garage. The unit showed an SS error code. The technician contacted tech support, reset the system, and restored proper function. All components were tested after service.

A plumber in Huntsville, Alabama repaired a leaking toilet by removing and resetting it. The work included replacing the wax seal, closet bolts, caps, and the supply line. All parts were provided by the contractor. Final testing showed no leaks, and the job came with a 90-day workmanship guarantee.

Dean Plumbing and Gas Piping installed a new gas supply system for a slab foundation home in Albertville, Alabama. The project included attic and garage piping, shut-off valve placement, and pressure testing. Technicians capped lines pending utility meter installation and provided a one-year warranty on workmanship. Drywall repairs remain the customer's responsibility.

Dean Plumbing and Gas Piping replaced a 50-gallon electric water heater in a garage in Huntsville, Alabama. The team installed a new unit with a drain pan, expansion tank, and copper fittings. They tested the system to ensure proper operation and confirmed there were no leaks. All parts were included, and the work is guaranteed for one year.

A plumber in Huntsville, Alabama rebuilt an older Delta shower valve in a hallway bathroom that was leaking constantly. The repair included replacing seats, springs, and a stainless steel valve ball. The technician restored the water supply, purged air from the system, and confirmed successful operation. The repair includes a 90-day warranty.

Dean Plumbing and Gas Piping replaced a hose bib next to a garage in Huntsville, Alabama. The team connected it to copper piping using a pen adapter and installed a frost-free hose bib. They sealed gaps with hydraulic cement and anchored the assembly to brick. All materials were supplied, and testing confirmed no leaks.

DEAN Plumbing and Gas Piping replaced a faulty pressure reducing valve in a crawlspace and installed a new lavatory faucet and toilet fill valve in a hallway half bath. Work included connecting new fixtures to existing plumbing. This plumbing service was completed in Madison, Alabama.

Dean Plumbing and Gas Piping replaced a toilet in a master bathroom in Huntsville, Alabama. They installed a Glacier Bay elongated white chair-height toilet with a new wax seal, supply line, and closet bolts. The customer supplied the toilet seat. All materials were provided, and testing confirmed there were no leaks at completion.

Dean Plumbing and Gas Piping replaced a leaking single-handle shower valve in Huntsville, Alabama. Technicians removed drywall and shelves to access plumbing, installed a Delta monitor trim kit and valve, connected it to existing PEX lines, and reinstalled the shelves. All materials were provided, and the system tested leak-free upon completion.

Dean Plumbing and Gas Piping replaced two toilet flappers, a fill valve, and a supply line during a standard toilet tank rebuild in Madison, Alabama. The tank was filled and flushed multiple times without issue. All materials were provided by the contractor, and work was confirmed leak-free upon completion.

Dean Plumbing and Gas Piping replaced a Delta shower valve trim kit in Huntsville, Alabama. The work included removing the old valve, installing a new valve, cartridge, trim, shower arm, and shower head. Connections were made using copper pipe and adapters. All plumbing was tested and confirmed to work without leaks.